[tulip] Tx out of buffers indication
Mon, 6 Aug 2001 17:01:28 -0700 (PDT)
When I previously had the card working the card was on irq 10, and it
seems that it only works on that irq. I some how managed to get it to use
that irq but can no longer do so. (My video card is using irq 10).
I just searched deja for references on what you mentioned but couldn't
Do you know how to fix this problem
On Mon, 6 Aug 2001, Donald Becker wrote:
> On Mon, 6 Aug 2001, Vishaal Kapoor wrote:
> > I recently mailed about a NetGear FA 510 (DS21143) pcmcia card running a
> > 2.4.5 kernel, but didn't get any responses. I decided to go back to the
> > 2.2.17 kernel using pcmcia-cs 3.1.21.
> > I am getting eth0: Tx hung errors so I ran tulip-diag
> > Rx process state is 'Waiting for packets'
> > Tx process state is 'Idle'
> > The transmit threshold is 128.
> > Interrupt sources are pending! CSR5 is f0678047.
> Your PCMCIA controller isn't letting interrupts through.
> Donald Becker email@example.com
> Scyld Computing Corporation http://www.scyld.com
> 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
> Annapolis MD 21403 410-990-9993