[tulip] Tx out of buffers indication
Mon, 6 Aug 2001 19:51:16 -0400 (EDT)
On Mon, 6 Aug 2001, Vishaal Kapoor wrote:
> I recently mailed about a NetGear FA 510 (DS21143) pcmcia card running a
> 2.4.5 kernel, but didn't get any responses. I decided to go back to the
> 2.2.17 kernel using pcmcia-cs 3.1.21.
> I am getting eth0: Tx hung errors so I ran tulip-diag
> Rx process state is 'Waiting for packets'
> Tx process state is 'Idle'
> The transmit threshold is 128.
> Interrupt sources are pending! CSR5 is f0678047.
Your PCMCIA controller isn't letting interrupts through.
Donald Becker email@example.com
Scyld Computing Corporation http://www.scyld.com
410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
Annapolis MD 21403 410-990-9993