Potential Scyld problem

[Ethan]

Art:

Yes, all I did was just the basic Scyld install.

-Ethan

Art Edwards wrote:

>Ethan:
>
>Thanks for the response. Am I to understand that you simply installed
>Scyld without an Mem commands and that it saw the memory?
>If so, that's really great! 
>
>Art
>
>On Mon, Sep 23, 2002 at 04:29:56PM -0500, Ethan wrote:
>
>>Hello Art,
>>
>>For what it's worth, I'm runing 27bz-8 on dual Athlon boards with 3 GB 
>>of ram each and it all gets recognized.
>>
>>-Ethan
>>
>>Art Edwards wrote:
>>
>>>I have finally decided to make the big step up to 27bz-8 on a cluster
>>>where each node has 1.5 GB DDR. 27bz-7 would only recognize ~1G of
>>>memory (I'm using Athlon CPU's, if that makes a difference.) Will this
>>>also be true for 27bz-8? If so, can I rebuild the kernel to make the
>>>system recognize 1.5G?
>>>
>>>Incidentally, a few weeks ago I asked whether gcc-3.2 would work on
>>>SCYLD. I was concerned about the mpi/beowulf libraries. I compiled from
>>>sources without any problem and the existing 27bz-7 libraries work
>>>without problems for the codes I typically run (GAMESS and QUEST)
>>>
>>>
>>>Art Edwards
>>>_______________________________________________
>>>Beowulf mailing list, Beowulf at beowulf.org
>>>To change your subscription (digest mode or unsubscribe) visit 
>>>http://www.beowulf.org/mailman/listinfo/beowulf
>>>
>>
>>-- 
>>Ethan Bisceglia
>>System Administrator
>>Industrial Manufacturing & Systems Engineering
>>Kansas State University
>>
>>
>>


-- 
 Ethan Bisceglia
 System Administrator
 Industrial Manufacturing & Systems Engineering
 Kansas State University