Potential Scyld problem

[Art Edwards]

Ethan:

Thanks for the response. Am I to understand that you simply installed
Scyld without an Mem commands and that it saw the memory?
If so, that's really great! 

Art

On Mon, Sep 23, 2002 at 04:29:56PM -0500, Ethan wrote:
> Hello Art,
> 
> For what it's worth, I'm runing 27bz-8 on dual Athlon boards with 3 GB 
> of ram each and it all gets recognized.
> 
> -Ethan
> 
> Art Edwards wrote:
> 
> >I have finally decided to make the big step up to 27bz-8 on a cluster
> >where each node has 1.5 GB DDR. 27bz-7 would only recognize ~1G of
> >memory (I'm using Athlon CPU's, if that makes a difference.) Will this
> >also be true for 27bz-8? If so, can I rebuild the kernel to make the
> >system recognize 1.5G?
> >
> >Incidentally, a few weeks ago I asked whether gcc-3.2 would work on
> >SCYLD. I was concerned about the mpi/beowulf libraries. I compiled from
> >sources without any problem and the existing 27bz-7 libraries work
> >without problems for the codes I typically run (GAMESS and QUEST)
> >
> >
> >Art Edwards
> >_______________________________________________
> >Beowulf mailing list, Beowulf at beowulf.org
> >To change your subscription (digest mode or unsubscribe) visit 
> >http://www.beowulf.org/mailman/listinfo/beowulf
> >
> 
> 
> -- 
> Ethan Bisceglia
> System Administrator
> Industrial Manufacturing & Systems Engineering
> Kansas State University
> 
> 
>