[vortex] Correct 3c905 model?

[Rodrigo Severo]

This is a MIME-formatted message.  If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_scorsese.fabricadeideias.com.br-16318-1067631536-0001-2
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit

Hi,


I have just received 5 3c905 boards of, I am afraid, the wrong model.

I bought 3c905C-TX boards and as far as I can tell I received 3c905-TX 
boards.

What are the real diferences, i.e. that I should care about, between 
these 2 models?

Which model to I have exactly? I am sending the output of vortex-diag -aemf.


TIA,

Rodrigo Severo

-- 
----------------------------------------------------
Rodrigo Severo
Fábrica de Idéias
Fone: +55(61)321 1357
Fax: +55(61)223 1712
SBS - Quadra 2 - Ed. Empire Center - Sala 1301
Brasília/DF - Brasil
CEP: 70.070-904
----------------------------------------------------


--=_scorsese.fabricadeideias.com.br-16318-1067631536-0001-2
Content-Type: text/plain; name="vortex.log"; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="vortex.log"

vortex-diag.c:v2.14 12/28/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3c905 Boomerang 100baseTx adapter at 0xc000.
 Station address 00:60:08:9f:74:ca.
  Receive mode is 0x05: Normal unicast.
Initial window 4, registers values by window:
  Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
  Window 1: ffff 0000 0000 0000 8000 0062 0000 e000.
  Window 2: 6000 9f08 ca74 0000 0000 0000 06c6 4000.
  Window 3: 02d8 0163 0000 0000 e040 0bff 13ff 6000.
  Window 4: 0000 06d0 0000 0cc0 0003 8802 0000 8000.
  Window 5: 1ffc fffc 06c6 1ffc 0005 06ce 06c6 a000.
  Window 6: 0000 0000 0000 0000 0000 0000 0000 c000.
  Window 7: 0000 0000 0000 0000 8000 0075 0000 e000.
Vortex chip registers at 0xc000
  0xC010: ffffffff 00000000 00008000 000013fc
  0xC020: 00000000 00000000 00000000 06000000
  0xC030: 00000000 000050eb 00000000 00000000
 Indication enable is 06c6, interrupt enable is 06ce.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  MII.
Transceiver type in use:  MII.
 MAC settings: half-duplex.
Maximum packet size is 0.
 Station address set to 00:60:08:9f:74:ca.
 Configuration options 06c6.
Saved EEPROM settings of a 3Com Vortex/Boomerang:
 3Com Node Address 00:60:08:9F:74:CA (used as a unique ID only).
 OEM Station address 00:60:08:9F:74:CA (used as the ethernet address).
  Device ID 9050,  Manufacturer ID 6d50.
  Manufacture date (MM/DD/YYYY) 10/1/1997, division 6, product KK.
  No BIOS ROM is present.
 Transceiver selection: MII.
   Options: negotiated duplex, link beat required.
 PCI Subsystem IDs: Vendor 0049 Device ffff.
 100baseT4 100baseTx 100baseFx 10baseT 10base2 AUI MII .
  Vortex format checksum is correct (49 vs. 49).
  Cyclone format checksum is incorrect (00 vs. 0xff).
  Hurricane format checksum is incorrect (00 vs. 0xff).
 MII PHY found at address 24, status 7849.
 MII PHY 0 at #24 transceiver registers:
   3100 7849 2000 5c01 01e1 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0001 8060
   8020 0c78 0000 3800 a3b9 0080 8005 001d.

--=_scorsese.fabricadeideias.com.br-16318-1067631536-0001-2--