[vortex-bug] problem with 3c59x driver

Samuele Giovanni Tonon samu@linuxasylum.net
Thu Apr 18 07:42:01 2002


On Thu, Apr 18, 2002 at 06:39:53AM +0200, Mikael Abrahamsson wrote:
> On Thu, 18 Apr 2002, Samuele Giovanni Tonon wrote:
> 
> > i have two computer (say A and B ) connected to the hub through rj-45 cable and a bnc (UTP
> > cable) that goes to another guy on to another room (say C computer ).
> 
> bnc for me has to do with koax cable (10Base2). UTP (unshielded twisted
> pair) is the same thing as "RJ-45 cable". 
> 
> What do you mean by bnc?
sorry it was late when writed the email .. i meaned bnc :-)
>  
> > i tried different option on the module driver (using full_duplex=1 and
> > full_duplex=0 ) just to see if it was an "configuration problem" 
> >  but it's always the same .
> 
> Make sure everything on your hub is using half duplex, otherwise 
> everything will perform very badly.
ok i'll look to it and if it won't work i'll mail again 

thanks

Samuele 

-- 
Samuele Giovanni Tonon  <samu@linuxasylum.net>   http://www.linuxasylum.net/~samu/
          	Acid -- better living through chemistry.
			       Timothy Leary