[vortex-bug] 3ccfe575ct - transmit time out, tx status 00

PEDRACINI Fabrizio fabrizio.pedracini@its.it
Tue, 3 Oct 2000 16:30:37 +0200


I have a Laptop with a 3ccfe575ct pcmcia card. The OS is Linux RH6.2 with
2.2.17 kernel version. The pcmcia drivers modules are taken from the package
pcmcia-cs-3.1.21.
My problem is that when I make a lot of traffic the network stops working
and I receive the following log messages:

Oct  3 17:51:44 mazinga kernel: eth0: Tx Ring full, refusing to send buffer.

Oct  3 17:51:49 mazinga kernel: eth0: transmit timed out, tx_status 00
status e000. 
Oct  3 17:51:49 mazinga kernel:   diagnostics: net 0ce0 media a800 dma
000000a0.

Then I must restart both network and pcmcia to be able to use the network
again.
I had the same problem with the kernel 2.2.14 and 2.4.0.pre3.

This is the message that I see when the network starts:

Oct  3 12:36:00 mazinga pcmcia:  cardmgr.
Oct  3 12:36:01 mazinga rc: Starting pcmcia succeeded
Oct  3 12:36:01 mazinga cardmgr[528]: starting, version is 3.1.21
Oct  3 12:36:01 mazinga kernel: cs: cb_alloc(bus 2): vendor 0x10b7, device
0x5257 
Oct  3 12:36:01 mazinga cardmgr[528]: watching 2 sockets
Oct  3 12:36:01 mazinga cardmgr[528]: initializing socket 0
Oct  3 12:36:01 mazinga cardmgr[528]: socket 0: 3Com 3CCFE575CT/3CXFE575CT
Fast EtherLink XL
Oct  3 12:36:01 mazinga inet: inetd startup succeeded
Oct  3 12:36:02 mazinga cardmgr[528]: executing: 'modprobe cb_enabler'
Oct  3 12:36:02 mazinga cardmgr[528]: executing: 'modprobe 3c575_cb'
Oct  3 12:36:02 mazinga kernel: 3c59x.c:v0.99Q 5/16/2000 Donald Becker,
becker@scyld.com 
Oct  3 12:36:02 mazinga kernel:   http://www.scyld.com/network/vortex.html 
Oct  3 12:36:02 mazinga kernel: cs: cb_config(bus 2) 
Oct  3 12:36:02 mazinga kernel:   fn 0 bar 1: io 0x200-0x27f 
Oct  3 12:36:02 mazinga kernel:   fn 0 bar 2: mem 0x60021000-0x6002107f 
Oct  3 12:36:02 mazinga kernel:   fn 0 bar 3: mem 0x60020000-0x6002007f 
Oct  3 12:36:02 mazinga kernel:   fn 0 rom: mem 0x60000000-0x6001ffff 
Oct  3 12:36:02 mazinga kernel:   irq 9 
Oct  3 12:36:02 mazinga kernel: vortex_attach(device 02:00.0) 
Oct  3 12:36:02 mazinga kernel: eth0: 3Com 3CCFE575CT Tornado CardBus at
0x200,  00:50:da:ae:92:f4, IRQ 9 
Oct  3 12:36:02 mazinga kernel:   product code 'ZN' rev 10.0 date 12-22-99 
Oct  3 12:36:02 mazinga kernel: eth0: CardBus functions mapped
60020000->c8048000. 
Oct  3 12:36:02 mazinga kernel:   8K byte-wide RAM 5:3 Rx:Tx split, MII
interface. 
Oct  3 12:36:02 mazinga kernel:   MII transceiver found at address 0, status
7809. 
Oct  3 12:36:02 mazinga kernel:   Enabling bus-master transmits and
whole-frame receives.

Thanks in advance,

Fabrizio Pedracini
e-mail: <fabrizio.pedracini@its.it>