Potential Scyld problem

[Art Edwards]

After sending you that message I realized all I had to do was interogate
the head node. Yes, it sees all of the Memory. My life (or at least a 
small part of it) is suddenly much easier.

Art Edwards
On Tue, Sep 24, 2002 at 12:08:46PM -0500, Ethan wrote:
> Art:
> 
> Yes, all I did was just the basic Scyld install.
> 
> -Ethan
> 
> Art Edwards wrote:
> 
> >Ethan:
> >
> >Thanks for the response. Am I to understand that you simply installed
> >Scyld without an Mem commands and that it saw the memory?
> >If so, that's really great! 
> >
> >Art
> >
> >On Mon, Sep 23, 2002 at 04:29:56PM -0500, Ethan wrote:
> >
> >>Hello Art,
> >>
> >>For what it's worth, I'm runing 27bz-8 on dual Athlon boards with 3 GB 
> >>of ram each and it all gets recognized.
> >>
> >>-Ethan
> >>
> >>Art Edwards wrote:
> >>
> >>>I have finally decided to make the big step up to 27bz-8 on a cluster
> >>>where each node has 1.5 GB DDR. 27bz-7 would only recognize ~1G of
> >>>memory (I'm using Athlon CPU's, if that makes a difference.) Will this
> >>>also be true for 27bz-8? If so, can I rebuild the kernel to make the
> >>>system recognize 1.5G?
> >>>
> >>>Incidentally, a few weeks ago I asked whether gcc-3.2 would work on
> >>>SCYLD. I was concerned about the mpi/beowulf libraries. I compiled from
> >>>sources without any problem and the existing 27bz-7 libraries work
> >>>without problems for the codes I typically run (GAMESS and QUEST)
> >>>
> >>>
> >>>Art Edwards
> >>>_______________________________________________
> >>>Beowulf mailing list, Beowulf at beowulf.org
> >>>To change your subscription (digest mode or unsubscribe) visit 
> >>>http://www.beowulf.org/mailman/listinfo/beowulf
> >>>
> >>
> >>-- 
> >>Ethan Bisceglia
> >>System Administrator
> >>Industrial Manufacturing & Systems Engineering
> >>Kansas State University
> >>
> >>
> >>
> 
> 
> -- 
> Ethan Bisceglia
> System Administrator
> Industrial Manufacturing & Systems Engineering
> Kansas State University
> 
> 
>