[vortex] Re: 3c595 full_duplex 100BaseTX problem

Ruben van der Leij ruben@blacklisted.nl
Tue Apr 15 19:58:02 2003


+++ Alex Bischof [14/04/03 01:48 +0200]:

> This is extremely unusual and typically indicates a configuration error.
> Perhaps the advertised capability set was intentionally limited.

>  Transceiver selection: 10baseT.
>  Transceiver selection: 10baseT.
>  Transceiver selection: 10baseT.

>     options 3c59x options=4,0,4 full_duplex=1,0,1

Yup. Download the DOS-drivers from support.3com.com. Boot from a dos-disk,
and start the 3c59x.exe you'll find along with the DOS-drivers.

Reset all three cards to default PnP-settings, no forced speeds, no forced
duplex settings. Remove all options from your insmod-command, and retry.

That will probably fix things. Somebody programmed the cards to do only
10Mbit half duplex.

-- 
Ruben van der Leij

Command, n.:
	Statement presented by a human and accepted by a computer in
	such a manner as to make the human feel as if he is in control.