3C905B

LENGARD Pascal OCISI pascal.lengard@francetelecom.fr
Wed Sep 9 07:47:49 1998


so your IP address is 192.168.0.1  ?
what does the command route shows ?
you will need to tell the kernel what packets it should route to eth0
to route everything to eth0 issue this command:
route add default eth0
BUT IF YOU USE A MODEM CONNECTION to internet, you'd better have your   
default route point to your modem (ppp0) so if your winblows computer is   
on the same sub-net, try
route add -net 192.168.0.0 eth0

then try pinging ...

 -----Message d'origine-----
De: Wayne Pascoe [SMTP:wpascoe@icon.co.za]
Date: Wed Sep  9 07:47:49 1998
À: linux-vortex-bug
Cc: linux-newbie; glug
Objet: 3C905B

Hi all...
I'm still trying to get this 3C905B to work... Here's what I've done so
far...

I've extracted my kernel source (2.0.35) to /usr/src/linux
I've then copied a new 3c59x.c to /usr/src/linux/drivers/net... As far as   
I
can tell it's version 0.99F
I've then compiled my kernel with 3COM Vortex / Boomerang support as a
module...
I've then rebooted the machine .... Here is the output of an ifconfig :

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
          RX packets:36 errors:0 dropped:0 overruns:0 frame:0
          TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 coll:0

eth0      Link encap:Ethernet  HWaddr 00:A0:24:58:55:60
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 coll:0
          Interrupt:9 Base address:0x6500

This is the output of an lsmod:

3c59x              5  1
ip_masq_vdolive    1  0
ip_masq_raudio     1  0
ip_masq_quake      1  0
ip_masq_irc        1  0
ip_masq_ftp        1  0
ip_masq_cuseeme    1  0
sound             24  0
ppp                5  0
slip               2  0
slhc               2 [ppp slip] 0
lp                 2  0
Module         Pages    Used by


So it looks like the card is loading and everything appears fine, but I
can't ping any machines on my lan... The card works fine under windows...
I've tried booting into windows and just soft-rebooting to linux. I've   
also
tried power off and straight to linux... None of this has given me any
clues...

I'd really appreciate any help!

 --------------------------------------------------------------------------  
 --
 -----
Wayne Pascoe (GiT)    wpascoe@icon.co.za

I've taken a vow of poverty. To annoy me, send money!