[tulip] Permanent interrupt mitigation with 21143 quad card

Ben Greear greearb@candelatech.com
Wed Nov 13 14:59:07 2002


Donald Becker wrote:
> On Wed, 13 Nov 2002, Ben Greear wrote:
> 
> 
>>I tried permanently enabling it, and it did not help.  I
>>might have not written the code correctly though...
> 
> 
> Have you looked at the work done by Josip Loncaric at ICASE?

No, I decided to stick with NAPI for the immediate future.  I'll
look up his work if/when I get time to do some more testing.

> 
> 
>>I'm attaching an un-official and mightily hacked up tulip driver
>>that does NAPI.  It should apply against 2.4.20-rc1, and maybe others
>>in the 2.4.19-preX range.  I'd be interested to know how it runs for
>>you.
> 
> 
> That's a hugh patch, and not all of it seems relevant.

Probably not.  Much of it was obtained from Robert Olsson's
patch, and then I added some more tweaking.  It sounds like there
is little or no interest to support tulip NAPI in 2.4.X, so my
goal was to play with things, rather than try to feed a patch
to an official maintainer.

However, I would love to hear suggestions as to how to make this
better.

-- 
Ben Greear <greearb@candelatech.com>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear