[tulip] Linksys Etherfast 10/100

[Jacob S.]

On Fri, 26 Jul 2002 12:09:43 -0400 (EDT)
Donald Becker <becker@scyld.com> wrote:

> The "real" v0.91g driver predated the ADMtek Centaur and did not
> support it.  
> 
> Use a current driver from
>  http://www.scyld.com/network/tulip.html
>     ftp://www.scyld.com/pub/network/tulip.c
> 

I was able to succesfully compile and insmod the new tulip driver, as
well as the pci-scan driver. However, /proc/net/dev/ and ifconfig are
still reporting the problem. Here's the details:

----/var/log/messages----
Jul 28 18:18:43 stonewall kernel: tulip.c:v0.95 6/21/2002  Written by
	Donald Becker <becker@scyld.com>
Jul 28 18:18:43 stonewall kernel:  
	http://www.scyld.com/network/tulip.html
Jul 28 18:18:43 stonewall kernel: eth1: ADMtek Centaur-P rev 17 at
	0xc4813000, 00:04:5A:6C:BA:AE, IRQ 11.
Jul 28 18:18:43 stonewall kernel: eth1:  MII transceiver #1 config 3100
	status 7869 advertising 05e1.
Jul 28 18:18:43 stonewall kernel: eth1:  MII transceiver #2 config 1100
	status 786d advertising 05e1.
Jul 28 18:18:43 stonewall kernel: eth1:  MII transceiver #3 config 1100
	status 786d advertising 05e1.
Jul 28 18:18:43 stonewall kernel: eth1:  MII transceiver #4 config 1100
	status 786d advertising 05e1.
--------------------------

----/proc/net/dev----
Inter-| Receive  packets  errs  drop  fifo  frame  compressed  multicast
face    bytes

eth0:  740026940 868391   0     0     0     0      0           0
eth1:  603450    2654     0     0     0     0      0           0 

Transmit  packets  errs  drop  fifo  colls  carrier  compressed
bytes

98279126  684746   0     0     0     320    0        0
0         0        2440  0     0     0      4854     0
----------------------

Any suggestions?
Jacob

----- 
In a world without fences, who needs Gates?

http://www.linux.org/