[tulip] No MII transceiver found

[Jarl Friis]

Hi, just downloaded netdrivers-3.3, system is otherwise SuSE 8.1

I can't get my NetGear FA510 PCMCIA to work, I have tried the tulip dirver
with debug=2 and among other things I get 
Dec  3 19:26:59 hermes kernel: eth0: ***WARNING***: No MII transceiver found!

Can somwone help? Or can I do something to improve the driver...

Thanks in advance.

Jarl

Following is the log for the commands insmod ..., ifconfig ... up,
ping, ifconfig ... down, rmmod:

Dec  3 19:26:59 hermes kernel: tulip.c:v0.95f 11/17/2002  Written by Donald Becker <becker@scyld.com>
Dec  3 19:26:59 hermes kernel:   http://www.scyld.com/network/tulip.html
Dec  3 19:26:59 hermes kernel: eth0: Digital DS21143-xD Tulip rev 65 at 0xd49a9000, 00:10:7A:15:F6:3E, IRQ 10.
Dec  3 19:26:59 hermes kernel: eth0:  EEPROM default media type Autosense.
Dec  3 19:26:59 hermes kernel: eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
Dec  3 19:26:59 hermes kernel: eth0: ***WARNING***: No MII transceiver found!
Dec  3 19:27:10 hermes kernel: eth0: Tx hung, 14 vs. 0.
Dec  3 19:27:10 hermes kernel: eth0: Digital DS21143 Tulip transmit timed out, status f0018107, SIA 000010c6 ffff0001 fff8ffbf 8ff40008, resetting...
Dec  3 19:27:10 hermes kernel: eth0: transmit timed out, switching to MII media.
Dec  3 19:27:14 hermes kernel: eth0: no IPv6 routers present
Dec  3 19:28:13 hermes kernel: eth0: Tx hung, 14 vs. 0.
Dec  3 19:29:03 hermes kernel: Trying to free nonexistent resource <d49a9000-d49a907f>