[tulip] strange media type problem

Christian Hoefer ch.hoefer@gmx.de
Wed, 3 Oct 2001 12:34:28 +0200 (MEST)


> 
> 
> On Wed, 3 Oct 2001, Donald Becker wrote:
> 
> 
> > 
> > Please report the driver detection message.
> > You shouldn't need to specify the media type for typical configurations.
> > 
> the running setup:
> 
> 
> tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
> eth0: Lite-On 82c168 PNIC rev 32 at 0xdc00, 00:A0:CC:60:A3:E6, IRQ 5.
> eth0:  MII transceiver #1 config 3000 status 7829 advertising 01e1.
> ippp, open, slot: 0, minor: 0, state: 0000
> ippp_ccp: allocated reset data structure c2f25800
> ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
> http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe000, IRQ 10.
> eth1: RealTek RTL-8029 found at 0xe000, IRQ 10, 00:00:B4:5A:F8:83.
> 
> The new one, not running:
> 
> ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
> http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe000, IRQ 10.
> eth0: RealTek RTL-8029 found at 0xe000, IRQ 10, 00:00:B4:5A:F8:83.
> tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
> eth1: Lite-On 82c168 PNIC rev 32 at 0xdc00, 00:A0:CC:60:A3:E6, IRQ 5.
> 
> 
> the loading order is the only difference, HW is not modified.
> 
> > Try the updated driver
> >    http://www.scyld.com/network/updates.html
> > 
> I'll try this next, Thanks.
> 
> /christian
> 

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net