PCMCIA Driver for SMC 10/100 CardBus

Thomas Gagne tgagne@ix.netcom.com
Mon May 8 21:05:35 2000


This is a multi-part message in MIME format.
--------------DC4C118F21A498463713F046
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Ok, I included too much.  I've attached a smaller clip of the file.  The
problems I'm seeing:

My system doesn't have a pci-netif.o file.  I've looked everywhere, and it
doesn't appear to be included in Donals's FTP directory.  Of course, I'm
unsure it's supposed to be there.

The cb_enabler.o and tulip.o files aren't found, because the loader is looking
for them in the pcmcia subdirectory, when both are installed by the RPM into
the /net subdirectory.  Is it safe to move them?  Does it do me any good to
move them if I'm still without pci-netif.o?

--------------DC4C118F21A498463713F046
Content-Type: text/plain; charset=us-ascii;
 name="messages.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="messages.txt"

May  8 16:29:21 rocky kernel: Linux PCMCIA Card Services 3.1.8 
May  8 16:29:21 rocky kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 
May  8 16:29:21 rocky kernel:   options:  [pci] [cardbus] [apm] 
May  8 16:29:21 rocky kernel: Intel PCIC probe:  
May  8 16:29:21 rocky kernel:   TI 1225 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets 
May  8 16:29:21 rocky kernel:     host opts [0]: [ring] [pwr save] [serial pci & irq] [no pci irq] [lat 168/32] [bus 32/34] 
May  8 16:29:21 rocky kernel:     host opts [1]: [ring] [pwr save] [serial pci & irq] [no pci irq] [lat 168/32] [bus 35/37] 
May  8 16:29:21 rocky kernel:     ISA irqs (scanned) = 3,4,7,9,10 polling interval = 1000 ms 
May  8 16:29:21 rocky cardmgr[1430]: starting, version is 3.1.8
May  8 16:29:21 rocky cardmgr[1430]: config error, file './config.opts' line 63: unknown device: rtl8139
May  8 16:29:21 rocky cardmgr[1430]: config error, file './config.opts' line 66: unknown device: rtl8139
May  8 16:29:21 rocky cardmgr[1430]: watching 2 sockets
May  8 16:29:21 rocky kernel: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x1087 
May  8 16:29:21 rocky kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 
May  8 16:29:21 rocky kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
May  8 16:29:22 rocky kernel: cs: cb_alloc(bus 35): vendor 0x1011, device 0x0019 
May  8 16:29:22 rocky cardmgr[1430]: initializing socket 1
May  8 16:29:22 rocky cardmgr[1430]: socket 1: SMC EZ CardBus 10/100 PC CARD
May  8 16:29:22 rocky cardmgr[1430]: executing: 'insmod /lib/modules/2.2.14-5.0/pcmcia/cb_enabler.o'
May  8 16:29:22 rocky cardmgr[1430]: module /lib/modules/2.2.14-5.0/pcmcia/pci-netif.o not available
May  8 16:29:22 rocky cardmgr[1430]: module /lib/modules/2.2.14-5.0/pcmcia/cb_shim.o not available
May  8 16:29:22 rocky cardmgr[1430]: module /lib/modules/2.2.14-5.0/pcmcia/tulip.o not available
May  8 16:29:23 rocky cardmgr[1430]: get dev info on socket 1 failed: Resource temporarily unavailable
May  8 16:29:55 rocky kernel: tulip.c:v0.92 4/17/2000  Written by Donald Becker <becker@scyld.com> 
May  8 16:29:55 rocky kernel:   http://www.scyld.com/network/tulip.html 
May  8 16:29:55 rocky kernel:   The PCI BIOS has not enabled the device at 35/0!  Updating PCI command 0002->0006. 
May  8 16:29:55 rocky kernel: eth0: Digital DS21143 Tulip rev 65 at 0xd008f000, EEPROM not present, 00:4C:69:6E:75:79, IRQ 0. 
May  8 16:29:55 rocky kernel: eth0: Old style EEPROM with no media selection information. 
May  8 16:29:55 rocky kernel: PCI: Increasing latency timer of device 23:00 to 64 
May  8 16:37:08 rocky PAM_pwdb[1463]: (su) session opened for user root by root(uid=500)

--------------DC4C118F21A498463713F046--

-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-tulip-request@beowulf.org