[tulip] Re: Linksys PCMPC200v2 Transmit Timeouts

[Donald Becker]

On Sat, 16 Dec 2000, Tom Reinertson wrote:

> Donald Becker wrote:
> > On Thu, 7 Dec 2000, Tom Reinertson wrote:
> > >  Interrupt sources are pending!  CSR5 is fc674014.
> > Yes, that's the problem: the interrupt isn't getting through.
> > This is almost always a problem configuring the PCMCIA control code.
> > Usually the PCMCIA code chooses working interrupts to use, but sometimes it
> > picks bad ones.
> 
> Is this a problem inside or outside the driver?  If I start looking at the
> tulip code would that help trying to solve this problem or does the problem
> exist before it even gets to the driver?

This is a problem outside the tulip driver.

It's likely a problem with your local configuration that can be solved by
reading the PCMCIA documentation. 

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993