PNIC LC82C169-9902

[Shawn Anderson]

Hi, 
  I am having troubles getting my asante 10/100 ethernet card to see my
other linux box. And am hoping someone could help me out.  I insmod the
tulip driver, start eth0 and try to telnet or ping etc... and I get no
network activity at all. 

sa@space$ uname -a
Linux space 2.2.10 #15 Sat Sep 11 02:39:26 MDT 1999 ppc unknown

the tulip driver sees my card as a: Lite-On 82c168 PNIC

asante tech support says it is a  PNIC LC82C169-9902

/proc/pci says it is:

  Bus  0, device  14, function  0:
    Ethernet controller: LiteOn LNE100TX (rev 32).
      Medium devsel.  Fast back-to-back capable.  IRQ 25.  Master
Capable.  Latency=32.  
      I/O at 0x400 [0x401].
      Non-prefetchable 32 bit memory at 0x80800000 [0x80800000].

here is the debug log (debug=6):

Sep 11 03:45:26 space kernel: Found Lite-On 82c168 PNIC at PCI I/O
address 0x400. 
Sep 11 03:45:26 space kernel:   The PCI BIOS has not enabled the device
at 0/112!  Updating PCI command 0004->0005. 
Sep 11 03:45:26 space kernel: tulip.c:v0.91g 7/16/99
becker@cesdis.gsfc.nasa.gov 
Sep 11 03:45:26 space kernel: eth0: Lite-On 82c168 PNIC rev 32 at 0x400,
00:00:B4:94:ED:99, IRQ 25. 
Sep 11 03:45:26 space kernel: eth0:  MII transceiver #1 config 3100
status 7809 advertising 01e1. 
Sep 11 03:45:32 space kernel: eth0: tulip_open() irq 25. 
Sep 11 03:45:32 space kernel: eth0: interrupt  csr5=0x02699084 new
csr5=0x02681000. 
Sep 11 03:45:32 space kernel:  In tulip_rx(), entry 0 80000000. 
Sep 11 03:45:32 space kernel: eth0: PNIC link changed state 0201f878,
CSR5 02699084. 
Sep 11 03:45:32 space kernel: eth0: interrupt  csr5=0x02001000 new
csr5=0x02001000. 
Sep 11 03:45:32 space kernel: eth0: exiting interrupt, csr5=0x2001000. 
Sep 11 03:45:32 space kernel: eth0: interrupt  csr5=0x02001000 new
csr5=0x02001000. 
Sep 11 03:45:32 space kernel: eth0: exiting interrupt, csr5=0x2001000. 
Sep 11 03:45:32 space kernel: eth0: Done tulip_open(), CSR0 00008000,
CSR5 02001000 CSR6 01420000. 
Sep 11 03:45:35 space kernel: eth0: MII status 7809, Link partner report
0000. 
Sep 11 03:45:35 space kernel: eth0: No link beat on the MII interface,
status 7809. 
Sep 11 03:46:35 space kernel: eth0: MII status 7829, Link partner report
0020. 
Sep 11 03:47:35 space kernel: eth0: MII status 782d, Link partner report
0020. 
Sep 11 03:47:47 space kernel: eth0: Transmit timeout using MII device. 
Sep 11 03:47:47 space kernel: eth0: interrupt  csr5=0x02699084 new
csr5=0x02681000. 

** then it keeps repeating the following:

Sep 11 03:47:47 space kernel:  In tulip_rx(), entry 0 80000000. 
Sep 11 03:47:47 space kernel: eth0: PNIC link changed state 0201f878,
CSR5 02699084. 
Sep 11 03:47:47 space kernel: eth0: interrupt  csr5=0x02001000 new
csr5=0x02001000. 
Sep 11 03:47:47 space kernel: eth0: exiting interrupt, csr5=0x2001000. 
Sep 11 03:47:47 space kernel: eth0: interrupt  csr5=0x02001000 new
csr5=0x02001000. 
Sep 11 03:47:47 space kernel: eth0: exiting interrupt, csr5=0x2001000. 
Sep 11 03:47:52 space kernel: eth0: Transmit timeout using MII device. 
Sep 11 03:47:52 space kernel: eth0: interrupt  csr5=0x02699084 new
csr5=0x02681000. 

any ideas would be appreaciated. 
Thanks,
sa
space19@earthlink.net