Linksys EtherFast 10/100 Cardbus (PCMPC200) problems...

[David Ford]

i'm using the linksys etherfast 10/100+modem combo in 2.3.x builtin pcmcia
and it works nicely except on some things like 3com superstack switches
(100FD), it flops back and forth on link beat detection.

-d

On Mon, 13 Dec 1999, Paul PH Wilson wrote:

> Date: Mon, 13 Dec 1999 14:30:01 -0600
> From: Paul PH Wilson <gonuke@bigfoot.com>
> To: linux-tulip@beowulf.gsfc.nasa.gov
> Subject: Linksys EtherFast 10/100 Cardbus (PCMPC200) problems...
> 
> Hello all,
> 
> I have browsed the archives of this list, and am still not sure whether
> or not this card should work?!?
> 
> I am using kernel 2.2.12-20 with pcmcia-cs-3.0.14, and have tried both
> version 0.91 and 0.91g of the tulip driver without success. The laptop
> is an Acer Travelmate 333T woth 64 MB of RAM.
> 
> When I try to use a static IP address, I get the "eth0: Tx hung, xx vs.
> 0" error that I have seen others report.
> 
> Before getting into more detailed error reports, should this card
> work????
> 
> Thanks in advance,
> Paul
> 
> -- --------------------------------------------------------------------
> |           /\             Paul P H Wilson
> |        |\/  \/|          gonuke@bigfoot.com
> |        |      |          608/263-0807  fax: 608/263-4499
> | _|\|\  |      |  /|/|_   http://www.bigfoot.com/~gonuke
> | \    \ |      | /    /
> |  \    \|      |/    /    UW-Madison Fusion Technology Institute
> |   \                /     1500 Engineering Dr, Madison, WI 53706
> |    \              /      http://fti.neep.wisc.edu/
> |    /              \
> |   /_  _  _  _  _  _\     My Canada includes Quebec
> |           ||
> |           ||             Another Environmentalist for Nuclear Energy
> |
> -- -------------------------------------------------------------------
> 
> 

--