Linux tulip and Win95 Dec21140

[Tomoo Nomura]

Hello,

I have an Win95 with Dec21140-AF (Acer ALN-310) and Samba 1.9.17p2 on Linux 2.0.35 with
Dec 21140-AF, tulip 0.89H. These are connected by crossover cable.

I suppose they can work as 100baseTX-FD.

When I open a file on Sambe from Win95, especially outlook.pst, it it very slow. It might
cause many collision. Indeed, when I connected the two by a 10-base-T hub, the collision
LED lighted every times.

-------------------------------------------
Here is dmesg

eth2: Digital DS21140 Tulip at 0xd800, 00 60 67 30 56 f1, IRQ 11.
eth2:  EEPROM default media type Autosense.
eth2:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth2:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
eth2:  Index #2 - Media 10baseT-FD (#4) described by a 21140 non-MII (0) block.
eth2:  Index #3 - Media 100baseTx-FD (#5) described by a 21140 non-MII (0) block
.
eth2:  MII transceiver found at MDIO address 1, config 3100 status 782d.
eth2:  Advertising 01e1 on PHY 1, previously advertising 05e1.
Max size:264704   Log zone size:2048
First datazone:166   Root inode number 339968
Appletalk 0.17 for Linux NET3.035
eth1: Promiscuous mode enabled.
eth1: Promiscuous mode enabled.
eth2: Setting full-duplex based on MII Xcvr #1 parter capability of 45e1.   
-------------------------------------------

1. Why it is very slow ?
2. Do they work as 100baseTX-FD correctly ?
3. Which is better FD or HD ?

Tomoo

-- 
************************************************************
  Nomura Technical Management Office Ltd.
                   http://www.tmo.co.jp/
  Tomoo Nomura     nomura@tmo.co.jp    Nifty:GBH12257
                   Fax: +81-78-797-0241
  ValueFax Support in Japan
  HAFAS Electronic Time Table in Japan
************************************************************