[tulip-bug] Ethernet card problems using tulip.o driver

Marino Phocas marino.phocas@parthus.com
Mon, 23 Oct 2000 12:54:12 +0100


I have linked two linux machines using a twisted pair cable. My hardware
works fine, as it works when booted up into windows. 

in linux I load the tulip.o driver using modprobe, this loads ok and i can
even see the LEDS on the NIC turn on. The problem is when I then type
"ifconfig eth0 192.168.1.1 netmask 255.255.255.0 up", the LEDs stop and
pinging does not get replies.

What am i doing wrong?

kind regards,


Marino Phocas
 
RF/Analogue Engineer
Parthus Technologies plc
Mansard Close
Westgate
Northampton
NN55DL
England
t:	+44 1604 586723
f:	+353 1604 585599
e:	marino.phocas@parthus.com
i:	www.parthus.com