"Tulip-compatible" macronix card...

[Pixel@pop-metz-21.pops.easynet.fr]

Hello.

I've bought a macronix card sold by CNet. Here's a extract of the pci detection:

bus slot vendId  devId   baseAddr0   cmd     description
--- ---- ------  ------  ----------  ------  -----------
 00  09  0x10d9  0x0531  0x0000e401  0x0087  MACRONIX:ethernet controller

Since the tulip driver says it detects and can use this card, I thought I could use it. But here's 
what's going on: as soon as the module (as I compiled the driver as module) one hub indicates that 
the card begins to emmit some packets very quickly, and by using another hub, it indicates there's 
no connexion on the port. And the linux kernel begins to send messages saying there were timeouts 
problems, and that it was resetting the device...

By looking around, I've seen that other people had the same problem, without finding a solution. So I 
wrote to you to know if there's a solution or a workaround.

By advance, thank you.

Nicolas NOBLE.