[realtek] insmod problem

Naresh Deshaveni nareshdesh at hotmail.com
Sat Oct 16 14:24:23 PDT 2004


Hi,

  I have been trying to get my RealTek 8139 card work in Redhat linux 8.0. 
but without success.
My linux  kernel version is 2.4.18-14

I had 8139too.o  in the /lib/modules/2.4.18-14/kernel/drivers/net/ 
directory.
When I did insmod 8139too I got the following message.
-----------------------------------------------------------------------------------------------------------------------------------------
/lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol 
mii_ethtool_gset_Raeb9c2b4
/lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol 
mii_nway_restart_R9d437993
/lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol 
mii_link_ok_R633bd7b9
/lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol 
mii_ethtool_sset_Rc366593c
----------------------------------------------------------------------------------------------------------------------------------------


The Dmesg gave me the following
----------------------------------------------------------------------------------------------------------------------------------------
dmesg
Linux version 2.4.18-14 (bhcompile at stripples.devel.redhat.com) (gcc version 
3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32512
zone(0): 4096 pages.
zone(1): 28416 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=303 
BOOT_FILE=/boot/vmlinuz-2.4.18-14
Initializing CPU#0
Detected 801.849 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 1594.42 BogoMIPS
Memory: 123816k/130048k available (1326k kernel code, 4832k reserved, 999k 
data, 212k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 2048 (order: 2, 16384 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=15604 max_file_pages=0 max_inodes=0 max_dentries=15604
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
PCI: Found IRQ 5 for device 00:1f.3
PCI: Sharing IRQ 5 with 00:1f.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup:  initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ 
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
oprofile: mapping APIC.
oprofile: enabled local APIC. Err code 00000000
oprofile 0.2 loaded, major 254
block: 240 slots per queue, batch=60
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: ST340823A, ATA DISK drive
hdc: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff)
hda: 78165360 sectors (40021 MB) w/512KiB Cache, CHS=4865/255/63, UDMA(66)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 
hda14 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 126k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 212k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 13:44:31 Sep  4 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal
Adding Swap: 265032k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.25
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
memory : c441a2e0
memory : 00000000
memory : c441a320
8139too Fast Ethernet driver 0.9.25
---------------------------------------------------------------------------------------------------------------------------------------




/sbin/lspci -v
---------------------------------------------------------------------------------------------------------------------------------------
00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory 
Controller Hub] (rev 03)
        Subsystem: Intel Corp. 82810E DC-133 GMCH [Graphics Memory 
Controller Hub]
        Flags: bus master, fast devsel, latency 0

00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset 
Graphics Controller] (rev 03) (prog-if 00 [VGA])
        Subsystem: Intel Corp. 82810E DC-133 CGC [Chipset Graphics 
Controller]
        Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 12
        Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Memory at e6000000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: [dc] Power Management version 1

00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 
[Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: e4000000-e5ffffff

00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 
[Master])
        Subsystem: Intel Corp. 82801AA IDE
        Flags: bus master, medium devsel, latency 0
        [virtual] I/O ports at 01f0
        [virtual] I/O ports at 03f4
        [virtual] I/O ports at 0170
        [virtual] I/O ports at 0374
        I/O ports at f000 [size=16]

00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corp. 82801AA USB
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at d000 [size=32]

00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
        Subsystem: Intel Corp. 82801AA SMBus
        Flags: medium devsel, IRQ 5
        I/O ports at 5000 [size=16]

00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 
02)
        Subsystem: Unknown device 4352:5934
        Flags: bus master, medium devsel, latency 0, IRQ 5
        I/O ports at d400 [size=256]
        I/O ports at d800 [size=64]

01:05.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
        Subsystem: Conexant Dynalink 56PMi
        Flags: bus master, medium devsel, latency 32, IRQ 5
        Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
        I/O ports at c000 [size=8]
        Capabilities: [40] Power Management version 2

01:0a.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M 
Ethernet PCI Adapter
        Subsystem: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet 
PCI Adapter
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c400 [size=256]
        Memory at e5010000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at <unassigned> [disabled] [size=64K]
---------------------------------------------------------------------------------------------------------------------------------------


I have googled but could not find the solution.
I have also downloaded the source code and compiled but still gettiing  the 
same  message.
I am not able to get the eth interface Up.
Even when I tried to load the  pci scan moudle I get the similar message as 
'.....unresolved symbol... '.

PLease help me in getting the card detected.
Thank you

Regards,
Naresh

_________________________________________________________________
Movies, music, celeb news. Stay in the loop. http://www.msn.co.in/cinema/ 
With MSN Entertainment!



More information about the realtek mailing list