[realtek] Problem with Accton EN1207D-TX

[Donald Becker]

On Tue, 9 Jan 2001, Ville Herva wrote:

> > > I'm unable to get the rtl8129.o working for an EN1207D-TX (the one HP
> > > ships with their Kayak PC workstations):
> > > 01:0b.0 Ethernet controller: Accton Technology Corporation: Unknown device
> > > 1210
> > 
> > Oh no, not another unique ID.
> > Although this one really looks like a corrupted low-order bit in the EEPROM,
> > not actually a new device ID.

> 01:0b.0 Class 0200: 1113:1210 (rev 10)

Well, it wasn't just a 'lspci' typo...

> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
> 		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

Hmmm, the chip is in D0 full-power state, but..

> root@terminator:/root/becker>rtl8139-diag -p 0xA800 -ee
> rtl8139-diag.c:v2.00 4/19/2000 Donald Becker (becker@scyld.com)
>  http://www.scyld.com/diag/index.html
> Assuming a RealTek RTL8129 adapter at 0xa800.
> EEPROM size test returned 8, 0xfffffff / 0x1fffffff.

It doesn't seem to be accessable.

Please try
  rtl8139-diag -p 0xA800 -e -a

> > No current driver will recognize this card.
> > Adding the table entry is trivial, but I won't do it to the distributed
> > version until we verify that this is not just a hardware or EEPROM
> > programming problem.

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993