[eepro100] Kernel 2.4.3 and eepro100 1.36 "card reports no resources"

Flavio Pescuma flavio.pescuma@marasystems.com
Tue, 29 May 2001 08:53:14 +0200


Hi all,


I'm experiencing the "card reports no resources" with a eepro100.c
driver version 1.36 (the work around in speed_resume is there).  I see
this error sometimes while booting and it becomes really often when
heavy load ( > 10Mbits).  This is an onboard NIC on a Intel 2150
server.  This machine is running squid so the heavy traffic load co
exists with a quite busy SCSI.

setup:

Linux kernel 2.4.3 
eepro100 1.36 (vanilla)
1 eepro100 (on board)
eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:90:27:6A:4B:FD, IRQ
21.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
  Receiver lock-up workaround activated.

1 DUAL eepro100
eth2: Intel Corporation 82557 [Ethernet Pro 100] (#3),
00:90:27:C3:4B:43, IRQ 20.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 711269-003, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.
eth3: Intel Corporation 82557 [Ethernet Pro 100] (#4),
00:90:27:C3:4B:44, IRQ 21.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 711269-003, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x24c9f043).
  Receiver lock-up workaround activated.                            

SCSI
Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
	<Adaptec aic7896/97 Ultra2 SCSI adapter>
	aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs

Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5
         <Adaptec aic7896/97 Ultra2 SCSI adapter>
         aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs




Suggestion?


Regards,

/flavio

-- 
Flavio Pescuma
MARA Systems AB
P +46 8 5554 8833  F +46 5554 8801 M +46 733548833
flavio.pescuma@marasystems.com
http://www.marasystems.com