[Fwd: [eepro100] errors with > 200k transfers] *RESOLUTION*

Darrell Schiebel drs@nrao.edu
Thu Dec 13 11:03:00 2001


On Tuesday, December 11 2001 at 10:13EST, Darrell Schiebel wrote: 
>Donald Becker wrote:
>> On Mon, 10 Dec 2001, Darrell Schiebel wrote:
>> > Date: Mon, 10 Dec 2001 14:34:13 -0500
>> > From: Darrell Schiebel <drs@nrao.edu>
>> > Donald Becker wrote:
>> > > On Mon, 10 Dec 2001, Darrell Schiebel wrote:
>> > > > On Sunday, December 9 2001 at 11:57EST, Donald Becker wrote:
>> > > > >On Fri, 7 Dec 2001, Darrell Schiebel wrote:
>> > > > >
>> > > > >> I have a (great) IBM ThinkPad X22. However, I get errors from the
>> ..
>> > > > >> Communications Daughter Card / Intel 82562ET chipset". Linux picks the
>> ...
>> > > > >Run 'eepro100-diag' and see if the "sleep mode" bit is set in the
>> > > > >EEPROM.  If so, run
>> > > > >    eepro100-diag -G 0 -w -w -f
>> > > > >to clear the bit.
>> > > >
>> > > >       Thanks for the suggestion.. however, eepro100-diag doesn't seem
>> > > >       to interface with the adapter correctly... when I first tried to
>> > > >       run eepro100-diag, it reported:
>>
>> OK, I've released a new version of eepro100-diag.  Here is the CVS entry
>
>I got the update and now it identifies the card correctly, but still doesn't seem
>to sense or clear the "sleep mode" bit properly (see below). It also doesn't seem
>to have the other info correct either.

	Thanks for the help! I found the e100 driver from Intel:

http://downloadfinder.intel.com//scripts-df/Detail_Desc.asp?ProductID=407&DwnldID=2896

	and it seems to work well.

							Darrell