[eepro100] suspend problem with eepro100, intel 82557

Alain E. alwt@udcast.com
Mon, 02 Apr 2001 14:37:35 +0200 (CEST)


Hello Jan,
On 02-Apr-2001 Jan Just Keijser wrote:
> Hi Alain,
> 
> looks like the transceiver type of your card is not detected properly (or is
> not recognized at all);

At least it works perfectly before Suspend/Resume
> can you please post the output of  eepro100-diag -D -f -aa (debug output)
> hopefully one of the eepro100 developers can then tell if/when this card
> will be supported.
> 
> This is definitely out of my league...

Thanks for your time.

Here is the output of eepro100-diag -D -f -aa:

Before Suspend/Resume:
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xdcc0
i82557 chip registers at 0xdcc0:
  0c000050 04f050e4 00000000 00080002 18250000 00000600
  No interrupt sources are pending.
   The transmit unit state is 'Suspended'.
   The receive unit state is 'Ready'.
  This status is normal for an activated but idle interface.
 The Command register has an unprocessed command 0c00(?!).
EEPROM size probe returned 0xff88003, 6 bit address.

After Suspend/Resume:
Index #1: Found a Intel i82557 (or i82558) EtherExpressPro100B adapter at 0xdcc0
i82557 chip registers at 0xdcc0:
  ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
  Interrupt sources are pending.
   The transmit unit state is 'Unknown'.
   The receive unit state is 'Broken-15'.
  This status is unusual for an activated interface.
 The Command register has an unprocessed command ffff(?!).
EEPROM size probe returned 0xfffffff, 8 bit address.

Alain.