[eepro100] problem getting eepro100 driver to work

Mike Schwartz schwartz@CodeOnTheRoad.com
Sun, 19 Nov 2000 20:43:31 -0700


--=====================_6463704==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hi,

I am trying to get an Intel EtherExpress Pro 100 NIC (built into an Intel 
Desktop Board D815EEA) working under Linux 7.0.  When trying to insmod the 
driver it complains:
/lib/modules/2.2.16-22/net/eepro100.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including 
invalid IO or IRQ parameters
/lib/modules/2.2.16-22/net/eepro100.o: insmod 
/lib/modules/2.2.16-22/net/eepro100.o failed
/lib/modules/2.2.16-22/net/eepro100.o: insmod eth0 failed
I checked the BIOS settings, and PnP OS is disabled (as noted in one of the 
scyld.com pages about this driver), and the LAN device is enabled.  All the 
IRQ priorirites were set to "auto".

I ran eepro100-diag, and it output:
eepro100-diag.c:v2.02 7/19/2000 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82562 EEPro100 adapter at 0xdf00.

Can anyone suggest what I need to do to solve this problem?

Thanks
  - Mike Schwartz
--=====================_6463704==_.ALT
Content-Type: text/html; charset="us-ascii"

Hi,

I am trying to get an Intel EtherExpress Pro 100 NIC (built into an Intel Desktop Board D815EEA) working under Linux 7.0.  When trying to insmod the driver it complains:
/lib/modules/2.2.16-22/net/eepro100.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.2.16-22/net/eepro100.o: insmod /lib/modules/2.2.16-22/net/eepro100.o failed
/lib/modules/2.2.16-22/net/eepro100.o: insmod eth0 failed
I checked the BIOS settings, and PnP OS is disabled (as noted in one of the scyld.com pages about this driver), and the LAN device is enabled.  All the IRQ priorirites were set to "auto".

I ran eepro100-diag, and it output:
eepro100-diag.c:v2.02 7/19/2000 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82562 EEPro100 adapter at 0xdf00.

Can anyone suggest what I need to do to solve this problem?

Thanks
 - Mike Schwartz --=====================_6463704==_.ALT--