[eepro100] Interrupts Question ...

[Aymeric BLAZY]

Hi,

I am using five eepro100 cards on a linux box that i am installing.
This box is running a 2.2.12 kernel on a RedHat-6.1 distribution.
Support of this card it's done by module with the latest revision :

eepro100.c:v1.10a 4/15/00 Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/eepro100.html

For now i only use one of this card for installation purpose ... eth0

As i see, eth1, eth4, etc etc share the same IRQ.
I would like to know if i am about to run on IRQ problem on this box .. box
freeze etc etc ...

[root@test]# cat /proc/interrupts
           CPU0
  0:    2599224          XT-PIC  timer
  1:        996          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      13975          XT-PIC  ida0
  8:          1          XT-PIC  rtc
 10:      37601          XT-PIC  eth0
 11:      12988          XT-PIC  eth1, eth4
 13:          1          XT-PIC  fpu
 14:          4          XT-PIC  ide0
 15:      12989          XT-PIC  eth2, eth3
NMI:          0

Thanks in advance
--------------------------------------------------------
Aymeric BLAZY
Exploitation - Jetmultimedia Hosting - 04.78.17.16.40
51, rue Montgolfier
69006 Lyon
WWW   : http://www.jetmultimedia.fr
--------------------------------------------------------