[Beowulf] Re: PVM on wireless...

Reuti reuti at staff.uni-marburg.de
Wed Feb 6 16:39:58 PST 2008


Am 07.02.2008 um 00:18 schrieb Bill Rankin:

> I have a home setup similar to yours - a WAP acting as a firewall,  
> dhcp from a linux server.  I have a spare laptop running CentOS, so  
> I'll give it a check tonight to see if mine runs.
>
> Q1: to you have DHCP giving a static address to your laptop based  
> upon it's MAC?
>
> Q2: have you tried this with the PVM 3.4.4 RPMs (I think you  
> mentioned you were running 3.4.5)?

There are even newer patches:

http://www.csm.ornl.gov/~kohl/PVM/pvm3.4.5+9.tar.Z

-- Reuti


> -b
>
>>
>> I can literally snap the same box onto a wire, wait for it to get  
>> an IP
>> number on the wire, and rerun the experiment on the same hardware  
>> and it
>> works perfectly (with a different but identically entered name, of
>> course).  And it is the wireless name that corresponds with the
>> `hostname` (in /etc/sysconfig/network), not that this should  
>> matter (and
>> it doesn't on the wire).
>>
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit  
> http://www.beowulf.org/mailman/listinfo/beowulf




More information about the Beowulf mailing list