UP2000 problems

[Alex]

If there are problems with the UP2000 and RH6.2 it is usually a hardware
failure. Hardware problems are not always easy to spot, see if you can get
any consistency in the problems and send it back to your vendor. They
usually do not have the capabilities to spot the problem either, and will
replace everything :-) IF the UP2000 is ok, it is a very good linux
platform. The problem is that the ratio of initial faillings is rather high.
Once it works ok, it will stay that way. In general: make sure that you pick
your vendor quite carefully with these things.

Alex


**********************************************************************
Disclaimer
This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Compusys or any of it's affiliates. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited.  If you have received this email in error please notify Compusys Customer Services by telephone on +44(0)1296 505140

This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses.
**********************************************************************