console redirect issue
Many of your questions may have already been answered in earlier discussions or in the FAQ. The search results page will indicate current discussions as well as past list serves, articles, and papers.
Abhishek sinha aby_sinha at yahoo.comThu Apr 4 16:43:01 PST 2002
- Previous message: Scyld node boot problem
- Next message: FreeBSD port of SGE (Compute farm system)
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hi list Sometime back i posted this problem on the list and now that i solved it i wanted to share my experience with the list. I had console redirection enabled on a Tyan 2505 T bios and everytime i used to boot it used to go straight in the BIOS. On the other side i was using Hyperterminal(customer requirement). I checked the console redirection on an older version of hyperterminal(windows 2000) and found it to be working . I mean the system was not going into BIOS everytime. But when i used the Hyperterminal version 5 that comes with win2000 professional the system it was going into BIOS every time it booted without touching any key. So much for microsoft technology that the newer version doesnt work and the older version does . Finally we resorted to using CRT in windows to do console redirect and it worked fine. I was trying to convince the customer to use minicom since we were selling Linux based servers and knew it would work, but to no use. being a tech i was amazed at what we can do with linux since we have the code open. U dont realise it a lot of time until u get a Application that doesnt run and u cant do anythign abt it . Its ridiculous that the older version of Hyperterminal works and the newer one shows strange problems... Abhishek Sinha California Digital Abhishek sinha wrote: > hi list > > > This might be just out of the topic, but i couldnt find help anywhere. > I am using serial console redirect on the 2505 t Tyan board. now i am > getting strange things that i have never seen before. When i connect > the machines with the null modem cable , the machine (where the > console redirect is enabled ) goes into the BIOS. If u save and exit > again it goes into the BIOS without doing anything. When u disconnect > the cable then this does not happen . I tried using a cross over rj45 > cable. With this i cannot see the POST messages and i can only see the > messages when the kernel boots. Is this an issue with the BIOS or some > one has been in wonderland and seen this issue . > > Please advise > abhisek > > _______________________________________________ > Beowulf mailing list, Beowulf at beowulf.org > To change your subscription (digest mode or unsubscribe) visit > http://www.beowulf.org/mailman/listinfo/beowulf >
- Previous message: Scyld node boot problem
- Next message: FreeBSD port of SGE (Compute farm system)
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Beowulf mailing list
