Slave node problem
Many of your questions may have already been answered in earlier discussions or in the FAQ. The search results page will indicate current discussions as well as past list serves, articles, and papers.
Claude Pignol cpignol at seismiccity.comTue Aug 21 08:08:44 PDT 2001
- Previous message: Slave node problem
- Next message: SSE & compilers
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
ericf at whispers.org wrote: >Hi, I just recently installed the Scyld Beowulf software (27bz-7) and have >ran into some difficulty with slave nodes. The front end setup went >smoothly and I made my floppy disks for the slaves. When I boot up the >slaves, they go through the boot process then start the RARP sequence, so >I dragged their MAC adresses from unknown to configured nodes and hit >apply. The slave nodes appear to get an IP address then (and this happens >pretty fast) the machine reboots. I noted it said neighbour table >overflow right after the IP assignment. I've waded thru the mailing list >archives and the only remotely relevent thing I found to my problem didn't >really have an answer. Any help would be greatly appreciated. > >Thanks in advance, >Eric > You could check what you have in the /etc/beowulf/config This file contains the Beowulf configuration and needs to be properly set up before you create your boot floppy. I think if you update the file manually you need to restart the beowulf deamons (from beosetup) before you generate a new floppy. Here is an example of config interface eth1 address 192.168.1.1 netmask 255.255.255.0 iprange 192.168.1.100 192.168.1.131 # Default libraries libraries /lib /usr/lib # Default file system policies. fsck full mkfs never # Default location of boot images bootfile /var/beowulf/boot.img kernelimage /boot/vmlinuz-2.2.17-33.beosmp kernelcommandline apm=power-off mem=1023m ..... Claude > > >_______________________________________________ >Beowulf mailing list, Beowulf at beowulf.org >To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf > -- ------------------------------------------------------------------------ Claude Pignol SeismicCity, Inc. <http://www.seismiccity.com> 2900 Wilcrest Dr. Suite 470 Houston TX 77042 Phone:832 251 1471 Mob:281 703 2933 Fax:832 251 0586 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.scyld.com/pipermail/beowulf/attachments/20010821/61582a59/attachment.html
- Previous message: Slave node problem
- Next message: SSE & compilers
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Beowulf mailing list
